1. Black Diamond petrol Log SplitterV-belt tightness adjustment: when the V-belt is too tight, the motor bearings will heat up, the speed will be reduced when the V-belt is too loose, and the V-belt will also slip easily, which affects the service life. When adjusting the tension of the V-belt, you can loosen the bolts that fix the motor base, and use the adjustment bolts to change the position of the motor on the slide, so that the V-belt reaches the required tightness, and then tighten the bolts.
  2. After the Black Diamond petrol Log Splitter motor works for a certain period of time, it is necessary to refuel or open the bearing for cleaning and refill with lithium-based lubricant. Restore the lubricity of the bearing.
    3. The Black Diamond petrol Log Splitter tool is not good enough, it is easy to cause the situation of broken knife and scrap. This situation is generally caused by the inconsistency between the center of rotation of the large and small Black Diamond petrol Log Splitter spindle and the center of the tool during the processing process. When the spindle is running at a high speed, if the spindle and the tool are not concentric, it will not only affect the forming degree of the processed wood pellets and the yield of the finished product, but also affect the processing effect.
    4. The power cord of the Black Diamond petrol Log Splitter motor must not be too long or twisted. This will easily cause the motor to undervoltage or undercurrent. I know that the working voltage of the motor is 380V, and the working current is marked on the nameplate of the motor. The rated current of the wire must be greater than the rated current of the motor. Otherwise, the motor will easily heat up or burn out under voltage or current.

Répondre

*