Customers who have used Rapid Splitter know that if the operation method is not standardized, Rapid Splitter will be stuck. Once the Rapid Splitter is stuck, it will not be able to be used normally, and it will even cause rapid internal damage to the Rapid Splitter. This is very unfavorable for Rapid Splitter to create high profits. So how to prevent Rapid Splitter from getting stuck? cnsuperpower Log Splitter Manufacturers will take you to take a closer look.

The root cause of Rapid Splitter stuck:
When the wood is broken by the Rapid Splitter, the general feeding method is generally horizontal feeding. The situation of the feed roller jamming in the Rapid Splitter is mainly due to the fact that many forced feeding or the thickness of the fed wood is too thick, it may be It has already exceeded 12 centimeters.
How to prevent Rapid Splitter stuck:
First of all, it is necessary to effectively control the amount of feed: this is as long as you usually pay attention not to thick materials more than 12 cm or large bundles of raw materials directly into the Rapid Splitter, which is generally not easy to happen.

Secondly, it should be ensured that the raw materials are fed along the length of the raw materials and placed horizontally. If the raw materials do get stuck in the silo, only the wooden roller is used to poke it. It is forbidden to poke it with an iron bar. If it falls into the machine room, it will not only damage the machinery and equipment, but also cause life safety. If the pairing with the transport machinery and equipment is not properly matched, it will lead to the weakening of the feed pipe or blockage after no wind; in such cases, first clear the delivery port to change the unmatched transport machinery and equipment, adjust the feed Volume, so that the machinery and equipment gradually operate normally.

Répondre

*